Wipe off the residue, go over the surface with a clean cloth and clean water, and let it dry. Then, lightly sand the worn area, going only with the grain. Round off any sharp edges of the finish.

Wipe off the residue, go over the surface with a clean cloth and clean water, and let it dry. Then lightly sand the worn area, going only with the grain. Round off any sharp edges of the finish.

End of carousel When the finish is worn through, the best option is to ... However, the nailheads are only about a quarter-inch below the surface when the floor is first installed (and even ...

This is called giving the surface “teeth” for this first coat to bite into and grab on. You aren’t trying to remove any of the previous finish ... be rubbed and worn. Then, transition ...

worn edges, dents or other defects that would impair the texture of the concrete surface. ACI 301-05 also required facing materials to be set in an orderly and symmetrical arrangement and required ...